Controller

Additional Product Details: How to Use the Remote Transmitter 1.To turn on/off the Transmitter, hold the mode button for 5 seconds; 2.Set to the different modes by pressing the mode button, the LCD images will change; 3.Press up/ down buttons on right hand to set vibration or static shock level; 4.Choose different channel for 1or 2 receiver collars; 5.The remote transmitter will go into standby mode if not operated for 5 minutes; 6.In standby mode, press any button except LED light button to wake it up. When turn off, hold the mode button for 5 seconds to turn on. How to Connect the Transmitter with the Collar Receiver 1.Turn on the remote transmitter by holding the mode button for 5 seconds; 2.Choose channel 1 or 2; 3.Turn on the receiver collar by pressing on/off button if it is already turned on; 4.The press the on/off button again and hold it for 5 seconds, the power light will start to flash; 5.You can hear 1st beep from the receiver collar, press Y button of remote transmitter immediately; 6.You will hear 2nd beep from the receiver collar, which means encode is successfully; 7.For 2nd receiver collar encode, repeat step 2 to 5, please be sure to choose different channel from 1st receiver collar. Package include: 1x Remote Controller , 2x Training collars; 1x Charger ; 2x Test light & replacement probes; 1x User Guide.