Currently browsing tag

Heater

Hound Heater Dog House Furnace Deluxe with Igloo Bracket

The Hound Heater Dog House Furnace Deluxe with Cord Protector will help protect your pet from the cold. It features a long-life heating element for many years of reliable use. This product can also be used for most dog and cat houses. Product is made from 16 gauge powder coated steel. Features: Has no sharp edges and will not burn your pet. Designed with an internal heat shield to protect all wires/components also keeps the front from getting hot allowing your pet to lay directly against the lower half of the unit without any danger of getting burned (please follow installation instructions) Made to all agency requirements including foreign UL requirements internal high limit switch shuts down the unit if it reaches 210 F automatically resets upon cooling. This can only happen if the unit is mounted improperly. 50,000 hr. rated 150 watt wire element (replaceable) 100,000 cycle heavy duty thermostat — (replaceable) “Just Set It and Forget It” Saves energy by only running when needed. Adjusts from 30 degrees Fahrenheit to 100 degrees Fahrenheit Draws 1.25 amps so it can be safely powered by an extension cord (any outdoor cord MUST be rated for 10 amps) External graphics say “mount this side up” to eliminate mounting questions comes with an external heat shield to disperse heat and keep any materials from sitting on top of unit. Heats up to a 32 cubic foot dog house but also works great for smaller cat and dog houses. Please note that several variables can affect performance including enclosed structure, insulation, voids, construction material, and weather (e.g. exposure to direct sunlight, wind, snow, ice, and drafts), among others. One-year limited warranty (warranty does not cover any damage due to accident, abuse, misuse, alteration, neglect, improper installation, or ordinary wear and tear).

Akoma Heat-N-Breeze Dog House Heater and Fan Black 10″ x 10″ x 4.5″

The Heat-N-Breeze solves the problem of proper ventilation in doghouses, keeping them cooler in the warmer months while heating the doghouse in the winter. The newly designed Heat-N-Breeze combines the Hound Heater with an incredibly long life whisper quite fan, bringing fresh air into your dog’s house in hot weather. The Heat-N-Breeze looks just like the popular Hound Heater, and even mounts to the same mounting plate. It draws outside air into the dog house at a rate of 24 cu. ft. per minute at a quiet noise level of less than 45 decibels, by a 30,000 hour silent fan producing a soothing sound for your dog. It refreshes the air within 1 to 2 times per minute. The built in thermostat allows you to set the fan to turn on and off at your preset temperature of choice, saving you power when the fan doesn’t need to run. You simply set it and forget it! The unit itself is made of 16 ga. powder coated steel. It is this easy. Flip a switch, turn the thermostat clockwise, and the Heat-N-Breeze is a Hound Heater, the world’s best selling pet house heater! Flip another switch adjust the thermostat and it becomes the world’s best pet house ventilator, the Hound Breezer. Easy to install (instructions included), easy to use and it will last for years!

Hound Heater Deluxe with Cord Protector

Just mount the unit, set the thermostat, and forget it.  The Akoma Hound Heater Deluxe Dog House Furnace with cord protector will help protect your pet from the cold.  It features a long-life heating element for many years of reliable use.  This product can be used for most dog and cat houses.  The heater is made from 16 gauge powder coated steel.  The Hound Heater comes equipped with a heavy duty chew-proof, 8 foot, 3-prong, grounded cord, a protective spring that covers the entire cord, heavy duty stainless steel — also features a cord strain relief to eliminate cord tension problems.  Easy installation, takes only a few minutes.  Includes easily understood directions with pictures.  All you need to do is drill a hole through the wall of the house, feed the cord through the hole, mount the Hound Heater Dog House Furnace, set the thermostat, and plug it in.  It’s that simple.   Features: Designed with an internal heat shield to protect all wires or components, also keeps the front from getting hot allowing your pet to lay directly against the lower half of the unit without any danger of getting burning (please follow installation instructions) Made to meet all agency requirements including foreign UL requirements internal high limit switch shuts down the unit if it reaches 210 F.  Automatically resets upon cooling.  This can only happen if the unit is mounted improperly 50,000 HR rated 150 watt wire element (replaceable) 100,000 Cycle heavy duty thermostat (replaceable) Saves energy by only running when needed.  Adjusts from 30 degrees fahrenheit to 100 degrees fahrenheit Draws 1.25 amps so it can be safely powered by an extension cord (any outdoor cord must be rated for 10 amps) Please follow installation instructions carefully.  It is extremely important that your house be insulated and preferably has a door/flap.

ASL Solutions Deluxe Insulated Dog Palace with Floor Heater

The Deluxe Dog Palace is a rotationally molded plastic house. It is made from material that can be commonly found in outdoor play ground products. All panels of these products are filled with recycled ESP foam. ESP foam (expanded polystyrene) can be commonly found in drinking cups. It is also used as an insulation material in construction.

Hound Heater Pet House Furnace/Heater

HHF-1 Cord Type: Standard- without Cord Protector Features: -Color:Blacks & Grays -Pet Category:Dog -Product Type:Heater. Dimensions: -Overall Product Weight:6 -Overall Depth – Front to Back:4.5 -Overall Width – Side to Side:10 -Overall Height – Top to Bottom:10